Power Supply Options - Vista DirectFive
Power Over Ethernet (Active PoE)
Connect the anchor to a network switch supporting PoE IEEE 802.3af standard via Ethernet cable.
Once the Anchor is connected to a stable power supply, a blue LED blinks several times that indicates the anchor was turned ON. Then the LED is turned OFF.
DC 48V, Passive PoE
The anchor can be powered from a single or multiple port PoE injector with DC 48V output. Power is supplied via Ethernet cable (pairs 4,5 positive terminal, 7,8 negative terminal).
Single-port Injector
| Injector with an integrated power source for AC. | Injector which requires an external DC 48V power source. |
|
|
Multi-port Injector for 19" rack
"Data LAN" ports are connected to the network switch, "Power+Data" ports are connected to the anchors.
Always use a galvanic isolated 
48V power adaptor with short circuit protection for passive PoE injection. Never connect “Power+Data” injector ports to the computer or other network devices.
Recommended PoE Injector power adaptor PN: GS36E48-P1J or GST36E48-P1J Meanwell. Available through whole-sellers Mouser, Digikey, or Farnell worldwide.
Power Bank
The USB connector is not available in Anchor Vista. Thus either a PoE power bank should be used or a USB to PoE converter and standard USB power bank. Please see the accessories.