Anchor LED Indication
Anchor LED can provide you information if any issue with the device. The LED shows three types of indications:
Information (operational condition)
| Event | Color | Animation | Type | Repetition | On/Off | Pause (no LED on) | Activation |
|---|---|---|---|---|---|---|---|
| Startup | Blue/Red |
| Lighting up | 1 | 100ms | 0ms | Auto |
Link Down Ethernet/WiFi | Blue |
| Flickering | 2 | 100ms | 500ms | Connection change, Check the connection every second |
| DHCP IP wait Ethernet/WiFi | Blue |
| Flickering | 4 | 100ms | 500ms | Unassigned IP address from DHCP server after connection. Mostly followed by Link Down. |
| Identification | Blue/Red |
| Brightness | Infinity | Brightness change | - | Anchor identification by the user, activation via RTLS Manager -> Anchors Summary.
|
Error
| Event | Color | Animation | Type | Repetition | On/Off | Activation |
|---|---|---|---|---|---|---|
| HTTP server init (Global) | Blue/Red |
| Lighting up | Infinity | Permanent | When Anchor is initialized. Ethernet HTTP server initialization failed. |
DW error | Blue/Red |
| Flickering | Infinity | 50ms | When initializing the UWB radio. |
| MAC address | Blue/Red |
| Flickering | Infinity | 500ms | When Anchor is initialized. |
| Network error (Err) | Red |
| Lighting up | Infinity | Permanent | Error creating sockets. Ethernet stack memory error. Unable to enable / disable DHCP on WiFi. WiFi server error with WiFi. |
DW losing lock error | Red |
| Flickering | Infinity | 100ms | UWB radio crystal malfunction. |
| Barometr init error | Red |
| Flickering | Infinity | 500ms | Error initializing barometer. |
Active Bootloader firmware
| Event | Color | Animation | Type | Repetition | On/Off | Activation |
|---|---|---|---|---|---|---|
| Bootloader active | Blue/Red |
| Lighting up | Infinity | Permanent | Access to the Bootloader (Magic Packet) during firmware upgrade. The LED after about 10 seconds problems when the HW restarts. |
